Hi all, how would I fix the top of the door sticking out not sitting flush with the aluminium frame?Photo is of when door is fully closed.Any ideas pl ...
Hi fellow reno's,
I am starting on a project. Sanding back flaking paint on window/wardrobe trims. These are the tools am using. Plus have electric ...
We have some water ingress causing some exposed bricks to be damp in our family room. Part was covered by wood which rotted and part with carpet (now ...
I removed a mental concrete filled interior door jamb. Now I need to fill the exposed double brick cavity and make the surface flush. Any suggestions ...
Hi guys,
I am trying to repaint my windows which have paint peeling off due to condensation and aging.
i was recommended using Taubman Stain Blocker ...
Hello everyone!
I could use some brainstorm help regarding the aesthetics of my new homemade barn door.
I'm thinking of having the back a different c ...
I have new LED downlights that have been installed by an electrician. I want to change the color from 4000k to 3000k using the switch on the device. D ...
Hi Bunnings world.
I'm considering building a granny flat. ( Yes will amend my current DA)
The issue I have is a wonderful one to have, I have a back ...
Hi,
I have a deck fascia clad in Hardie board (I believe). Beneath the Hardie are various lengths of timber, some of which has rotted, that is then a ...
Hi, we are currently having a rodent(big mice or small rats) problem in our roof and we have started the process of trying to fill in all of our gaps ...
I've had hydroplank hamptons flooring professionally installed.
The flooring was installed over the top of tiles after self levelling was poured.
Ther ...
Hi community,I'm looking to add insulation and moisture protection under a timber floor for a terrace house (ground level). The timber floor will go o ...