Hello all!
We are planning to level our backyard which is about 600mm high. We were recommended to add a retaining wall against our fence to ensure ...
Hi
I need to replace Colourbond fence with Aluminium slate gate (width 1630 x height 1845 mm approx.) This is DIY kit which I have assembled. Gates ...
Its that time of year when we all start to want to hang out on our decking only to frown at the state it is in... Well yeah I did So I have rolled th ...
I am considering building a garage over a space that used to house a carport. One wall of the garage would sit on top of a timber sleeper retaining w ...
Hi,
Ive a 3x5m space Id like to install a shade sail on but am unsure about ones that Bunnings has like this one:
https://www.bunnings.com.au/marque ...
The pool panel got damaged from a resent gust of wind and the umbrella crashed into the panel. Subsequently it now loose and not in line with existing ...
Hi Team, I have removed an old steel fence and am left with the round steel posts as shown in the pic. I'd like to add timber sleepers or similar to ...
This backyard's pool area has a 1.8m tall partition wall separating the pool area from the pump and pool equipment in the back corner and clotheslin ...
I want to set a 50mm SHS fence post beside the high side of a limestone retaining wall, but there is a footing course only 350mm down. The post will ...
A mate of mine's rear entry garage door was starting to suffer the exposure of the weather. Plus after each time it had rained, water would drip over ...
I would like to patch / repair external rendered wall which has some cracks / areas of render chipped off in couple of spots and then paint it. The ...
What’s the easiest way to remove an existing corrugated iron fence but leave the poles to grow veges along wires? There’s a new higher, modern fence b ...