Share
Hello @bijujose
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your Hafele bin.
The Hafele OSKA-FSC is not meant to operate with the door swinging out. You'll notice that the front of the bin has angle brackets in the middle section of its pullout frame. This is where the door is meant to be mounted on so that when you pull the door it pulls the bin out as well.
If you need further assistance, please let us know.
Eric
Hi Eric, Thanks for your reply. I choose these bins by mistake in my building contract. What I wanted was bins mounted to the door. I have uploaded a sample picture. Is it possible to remove the hinged door and mount it to my current Hafele OSKA-FSC (503.06.722) pull-out? If yes, could you please help with the instructions? Thanks
Hello @bijujose
I suggest having a look at this guide - How To Make A Pull-Out Trash Bin. It has an example of how the door can be attached to the pull-out bin. I have sent an email to Hafele about the bin installation. Once they respond, I will get back to you.
If you need further assistance, please let us know
Eric
Hi Eric,
Thanks for your email. Please see the pictures of the bins that my builder has installed. Could you please let me know what type of angle brackets should I buy to attach the current hinge door to the bins? Thanks
Hello @bijujose
I have placed a picture of your pullout bin with yellow circles. The bracket is already attached to your bin and does not need new brackets. You just need to mark the position of the brackets on your door and screw the door to the pullout mechanism of the bin. Make sure to remove the hinges as they are no longer needed. If you feel that it is too difficult, I suggest engaging the services of a handy person to attach the door for you.
If you need further assistance, please let us know.
Eric
