@billbum I wet sanded it by hand, I think I started with 400 and went to 600 grit. I found that wet sanding gave a nicer finish than using an orbital ...
@billbum I kept it covered for a few days, and just checked it when I thought about it really. Probably a few times each day, and gave it a spray with ...
I can't figure out how to edit the original post to add any more pictures, but here's a picture of the table after I installed the legs.I used these s ...
Thanks @Dave-1 @Random_will I used only the penetrating sealer, which is pretty good. It will be fine to protect the tabletop from most things as long ...
Hey @raygun I got a friend to help and we carried it over to the grass and sat it on some bricks. With the sides of the form removed, the concrete cou ...
Thanks Eric! This is the sealer I used https://conpell.com/Impregnating-sealers/protect.html I couldn't find a suitable water based sealer at my local ...
Good afternoon @markw Far out! How good did that tabletop turn out! Ive wanted something like this for a long time but havnt seen a something as smoo ...
Hello @markw
Thank you so much for sharing the photos and steps you took to build this amazing concrete benchtop. Often these types of benchtops hav ...
Hey @raygun I got a friend to help and we carried it over to the grass and sat it on some bricks. With the sides of the form removed, the concrete cou ...
Thanks Eric! This is the sealer I used https://conpell.com/Impregnating-sealers/protect.html I couldn't find a suitable water based sealer at my local ...
I did a bit of research to find suitable materials for this project, so here's a quick overview that others can hopefully find useful.
Here's how th ...
I just made a concrete tabletop using this concrete: https://www.bunnings.com.au/easy-mix-20kg-55mpa-super-strength-concrete_p0760460 really happy wit ...
