low profile fan - minimum ceiling height

[Lizzy224]

Hello, my ceiling is only 2.31m high - does anyone know if a builder would install an overhead fan - if it was a low profile one? 

I’ve found one that has a Ceiling to Blade Measurement of 183mm. Or is the ceiling just generally to low? 

thanks!

[Jewelleryrescue]

Hi @Lizzy224 

I just stopped my roof fan spinning so I could measure my roof height standard is  2.4m approx  My fan blade hangs down 300mm from the roof.

So floor to fan blade height 2100 meters  for my  place. and that is perfectly comfortable  height for most people we had  visit.

So  your floor  to roof height is 2.31m (2310)   your planned fan is 183mm from the ceiling  so  that means  2310 - 183 = 2127mm

So  your floor to ceiling height is 27mm taller than  my house.  So your plan sounds  good.

Sparky would do that work for the builder.   

Tip: To save money think up all your  pending preferred electrical  changes eg  lights   power outlets  etc and have them  all done in in the same  visit.

[MitchellMc · Accepted solution]

Welcome to the Bunnings Workshop community @Lizzy224. It's sensational to have you join us, and many thanks for your question about ceiling fans.

The Australian Standard AS 4226 – 2008, Clause 12.5. 3 states that all ceiling fans should be at least 2100mm from the floor. With a 183mm ceiling fan installed on your 2310mm high ceiling, that would place the ceiling fan 2127mm from the floor and comply by 27mm.

Please let me know if you have any questions.

Mitchell