The Bunnings Workshop community can help with your home improvement projects.
I have an Ikonic digital entry lock installed on an external gate.
Recently the latch has been sticking and not returning fully to enable the gate to lock.
The rear handle has a ‘snib’ that has no details as to how to operate provided in the ikonic instructions.
Does the snib need to centred to the left etc please or how to adjust ?
Any help would be greatfully received as the lock has worked ok until recently
Hello @kav1107
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your digital lock.
If your lock was originally functioning properly and the latch is now starting to stick, I suggest using the 3-In-One 150g Lock Lubricant on the latch. It's possible that debris might have entered the latch mechanism and just needs a bit of lubrication to loosen it up. As to the purpose of the snib, please allow us to contact our supplier so that we can make some inquiries regarding its purpose.
Looking at the original packaging, I think it's facing in the correct direction. As soon as we get more information, we'll get back to you.
Thank you for your patience.
Eric
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.