How to replace mirrored wardrobe door rollers? R2711 ROLLTRAK

[Crouchy_renos]

  

Hi All,

I have read, followed and implemented other people’s questions and responses over the years. Which I thank you all for.

I have scoured the internet trying to work out how to replace the Rolltrack “Adjustable Carriage & Convex Roller” R2711. 
I can not find any information what so ever about this type or brand (or any other brands for that matter) of roller or how to replace it. 

There are what I now believe to be 2 x shaved down rivets at the base of the door which holds the carriage in place. 

My question is:

A) how do I replace the carriage and roller?

B) is it as simple as drilling out the rivets and installing new ones with the new carriage?

C) should I then make a video of this repair as there are NONE online (ha). 

Thank you all for your help. 

[Noyade]

Hello @Crouchy_renos 

Hard to tell with my eyes from this side of the monitor - but the left side looks like a proud countersunk screw designed for a 'square' bit?

Any chance of a better photo?

Cheers.

[Crouchy_renos]

Hi @Noyade 

Thanks for the input. 
I cleaned it out and turns out it was a flat rivet head. 
I ended up drilling it out with a 3.5mm drill bit and installing new rivets to secure the new mount. 

Thank you for your help. 

[MitchellMc]

Welcome to the Bunnings Workshop community @Crouchy_renos.
 

It's great to hear that you've resolved the situation. Many thanks for the update.

Mitchell