Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Kitchen

Help for kitchen renovation projects
angelique5
Growing in Experience
2 replies

            I need to reseal the kitchen sink as all the sealant has come away and laminate is lifting as too much water getting through also no ...

DocAdkins
Finding My Feet
6 replies

Purchased this mixer but can’t see how you can properly tighten the two flex hoses to the mixer body. Previous mixers I’ve installed had the inlet ta ...

caramelhead
Just Starting Out
1 reply

We are looking for a 1 and 3/4 kitchen sink with the drainer on the right hand side. We like the look of the Estilo 1 & 3/4 Bowl Sink With Drainer Rig ...

QxDONG
Finding My Feet
6 replies

The sink is leaking from all the edges heavily. what shall I do to fix it? Thank you

Thomas78
Just Starting Out
1 reply

I purchased an Estilo pull out sink mixer. The installation instructions were pretty simple and I had just installed another tap in the bathroom, same ...

Rosie1
Just Starting Out
1 reply

We are removing our kitchen wall and are wanting to reroute this PVC venting pipe with 45 degree bends by 40cm and then put another 45 degree bend in ...

Ak100oz
Finding My Feet
1 reply

  Hi team i wanna replace gas cooktop I have old technika techikna facebook support sent me measurement and model name and told me its 70cm Model ...

Kwongk
Finding My Feet
15 replies

We bought a Mondella Resonance curved sink mixer from the local Bunning store recently and have it successfully installed. It is working ok. The inf ...

MinB
Building a Reputation
66 replies

I am considering buying a benchtop dishwasher, but am not sure what is currently available so as to connect the hose to the kitchen tap. 5 years ag ...

elsybel
Just Starting Out
2 replies

Hi, Any ideas what I need to connect my existing water inlet hose to my new dishwasher?     

Pauliina
Finding My Feet
4 replies

We have just installed Mondella Curvy Chic Vege Spray sink mixer. Unfortunately it is leaking from the joint of the mixer and pull out hose. It's been ...

MW1
Just Starting Out
1 reply

Hi - we recently had a new whirlpool dishwasher  installed by the company we bought it from. First dishwasher run and it’s not draining. Has the erro ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects