Upcycled chisel mallet from an old coffe...

AndrewJones

Maker, youtuber and woodworker. Watch me work wood in 24 frames per second: https://www.youtube.com/user/andii1701/videos

Wayne

That has come up an absolute treat!

I made this one several years ago now from some scrap Jarrah and Pine, I glued some leather on the faces (not shown here) and it is one of the most used tools I have.
I used the plans from here...
https://www.youtube.com/watch?v=JcaV5jWpR1k

Wood Working with Wayne

AndrewJones

@Wayne nice one. That mallet looks very good!

Maker, youtuber and woodworker. Watch me work wood in 24 frames per second: https://www.youtube.com/user/andii1701/videos

Yorky88

@AndrewJones @Wayne these both look great guys. I am looking to make some mallets for myself. How have you guys attached the handles? Did you just use a mortise and Tenon joint?

AndrewJones

@Yorky88 Mortace and tenon with a small wedge tapped in from the top.

Maker, youtuber and woodworker. Watch me work wood in 24 frames per second: https://www.youtube.com/user/andii1701/videos

Upcycled chisel mallet from an old coffee table leg

Upcycled chisel mallet from an old coffee table leg

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Why join the Bunnings Workshop community?

Upcycled chisel mallet from an old coffee table leg

Share

Upcycled chisel mallet from an old coffee table leg

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Re: Upcycled chisel mallet from an old coffee table leg.

Why join the Bunnings Workshop community?

You might also like

Garage laundry makeover

Formal entrance created using single car garage

A workshop for Max and his dad

The Father & Son Bar - man cave construction project