Thank you @Wayne for sharing this with us. I've been trying to make one out of melamine and not happy with the way it's going, or looking. So think ...
Hi @Fitzie, I would recommend a Japanese pull saw. Very sharp, very accurate, fine teeth cross-cut and coarser for ripping. I used it for the dovetail ...
As a Carpenter's daughter I was brought up with wood shavings in my hair and the perfume of fresh wood... Spent many hours just watching my Dad chisel ...
Great project as always @Wayne. Many thanks for sharing in such terrific detail. I'm sure other Workshop members will be keen to replicate your work.
...
Hey Everyone - hoping I could get some advice on which would be best suited (also cost friendly) for cleaning up and also decreasing the amount of dus ...
My Kreg router table roughly 900 x 600 has 4 locking castors and it's easy to move. Stable with all 4 locked, with only 2 locked it will move if you p ...
Of course I ended up with a door where the offcuts bin is and two windows either side of a central panel on the north wall (bottom of plan) over the w ...
