Share
I'm looking to find out what type of wood these shelf supports are made of. I've had new shelving put in on another wall but without the supports. I want to see if I can get similar shelf supports put in.
They're 37mm wide, 70mm deep, and up to 2100mm long (height of shelving from floor).
Good Evening @theegg
Welcome to the Buunings Community 
Definently a good place to ask these type of questions.
It looks rough cut 35mm by 70mm pine 70 x 35mm 2.485m Framing DTL MGP10 Untreated Pine
Went for a cruise through google land and the only timber I found with that definite grooving was a H3 FJ Treated pine. Tho I dont think that is the right term. I think its just a rough cut (compared to a smooth surface) 35mm by 70mm pine.
@JacobZ or @EricL would know I am sure
Dave
Hello @theegg
Welcome to the Bunnings workshop community. It's sensational to have you join us and thanks for sharing your question about your wood shelf supports.
It appears to be a rough cut 70 x 35mm Framing MGP10 Untreated Pine 2.4m that has a standard dado join to keep the horizontal piece in place. If you can please post another photo of the entire assembly, we'll be able to give you better advice.
If you need further assistance, please let us know.
Eric
