How to adjust semi framless shower screen?

[Andrew10]

Hi, 

The semi frameless shower screen door has sagged. It has no hinge adjustment screws anywhere. Pictures attached. 

Do I have to drill out the pop rivets and start again ? 

[EricL]

Hello @Andrew10 

Welcome to the Bunnings Workshop community. It's sensational to have you with us, and thanks for sharing your question about your shower door.

I suggest having a look at this discussion - How to adjust alignment of bathroom shower door? by @bennyboy. In the discussion, I've drawn up a diagram indicating how the hinges have covers on them to hide the adjustment screws.

However, please note that shower glass doors are made from tempered safety glass and one wrong hit or too much compression will make them shatter. I strongly suggest engaging the services of a shower installation specialist and asking them for quote for a door re-adjustment service. 

If you have any other questions we can help with, please let us know.

Eric

[Andrew10]

Hi Eric, 

Thanks for the info and link, but there is no adjustment screws. Just pop rivets as per my pictures.

cheers 

Andrew 

[EricL]

Hello @Andrew10 

If that is the situation, I can only suggest engaging the services of a professional shower installer and asking them for a quote for a shower door adjustment. I'm afraid your shower pivot hinge has been installed in a more permanent manner and adjusting them will require the services of a professional trade's person.

I propose posting the job on Airtasker or Hipages and putting in as much information as possible so that you can get an early response.

If you have any other questions we can help with, please let us know.

Eric

[Andrew10]

Hi Eric, 

Thanks for the help.

cheers 

Andrew