Hi mate, I still have the issue as I didnt get around to implementing any of the final suggestions provided by EricL and the team. This is after the r ...
A big thank you to every one of you who replied and provided suggestions. I'm still tryng to process through these, as well as contemplate on what my ...
Thanks a lot for pitching in with your experience and feedback. Lots for me to ponder on. One observation i had with this setup is that it runs on Wif ...
Hi team, thanks for the wonderful threads with ideas, suggestions and help articles.
I'm looking to embark upon the home automation journey, albeit o ...
@EricL I had tried the adjustments on the lower hinge too, with no luck.Looking top-down onto the door, this looks to be the issue. The glass is held ...
@EricL thanks for your tip. I only got around to trying this today. Removing the plastic cover reveals a screw which is to control the alignment of th ...
@MitchellMc thanks a lot for your reply and taking the effort to illustrate the same. I had a look at the door channels, and they are indeed high sid ...
@Remarka6le , what a find.. that is the exact same shed model! Certainly does look like a design oversight, more of an issue if your shed front tends ...
I think I've mentioned before some right angle aluminium on the inside with some sikaflex or Shelly's polyurethane will do the trick or just the polyu ...
Hi @bennyboy,
In addition to the resources Eric has shared, you might want to check out the article Smart home: where to start from the Bunnings tea ...
Hi @bennyboy
Thanks for sharing your question about where to start with home automation. I've been using the Grid connect system in my house for th ...
@rocker
None at all and that's because it's a 2 part product like 2 pack paint so it has a hardner unlike single pack that relays on oxygen to cure o ...
I started out around a month ago the transformation taking my 3 car shed for which I used to restore cars in and putting it through the transformat ...
Hi mate, I still have the issue as I didnt get around to implementing any of the final suggestions provided by EricL and the team. This is after the r ...
A big thank you to every one of you who replied and provided suggestions. I'm still tryng to process through these, as well as contemplate on what my ...
@MitchellMc thanks a lot for your reply and taking the effort to illustrate the same. I had a look at the door channels, and they are indeed high sid ...
@Remarka6le , what a find.. that is the exact same shed model! Certainly does look like a design oversight, more of an issue if your shed front tends ...
@CSParnell @EricL Here's a quick update. I had a look this morning, and can see what is the possible cause of the water ingress. Sealant appliedSeal ...
Thanks a lot @CSParnell and @EricL .I've gone ahead and bought Sikaflex as per the initial recommendation, along with the caulking gun, and will give ...
Hi, I constructed an Absco 3m x 3m garden shed on an existing concrete slab as a DIY (totally new to DIY, and highly inexperienced). With the build co ...
