Wow, Jacob! Wow! Thank you so much for these suggestions! I’ll try them, in order, and let you know how I go.
But in the meantime, Santa’s stocking is ...
Hi Jacob,
yes, I do feel I might be trying to stretch the laws of physics with this one!
Here are some photos and measurements for your consideration- ...
Hi Jacob-
The bolt coming from the base and into the rod is relatively short, as I don’t want it near the internal wiring of the lamp.
unfortunately ...
Thank you Jewelry Rescue and Jacob-
both suggestions are very helpful- good old fashioned arose to the rescue (once I’ve removed the current messy glu ...
Hi- I’m attaching a wooden base to a vintage metal table lamp.I’ve inserted a screw thru the wooden base and into the central column of the lamp, but ...
Hi Mitchell,
Thanks so much for your speedy response! I’ll try it.
unfortunately I don’t have the chip, so I’ll need to build the surface up a bit.
Wi ...
Hello @Judith2
Thank you for sharing the details of the bed you'll be using. Because you are after a 4-poster set that can support curtains, I prop ...
Wow, Jacob! Wow! Thank you so much for these suggestions! I’ll try them, in order, and let you know how I go.
But in the meantime, Santa’s stocking is ...
Thank you Jewelry Rescue and Jacob-
both suggestions are very helpful- good old fashioned arose to the rescue (once I’ve removed the current messy glu ...
Hi all- a couple of things that helped in the end-
1.Put the vertical legs together first, so they were the full finished height
2. Leant 2 verticals ...
Hi Jacob, thanks for your reply. I should say at the outset that I didn’t buy these shelves from Bunnings, mores the pity! Unfortunately, they didn’t ...
Thanks Mitchell- I appreciate the tip about using an electric staple gun- there will be more than a few staple involved!
sorry to hear Bunnings doesn’ ...
Thanks Jacob-I’ll take your advice. believe me, I’m very sensitive to risks of electricity-I electrocuted myself once- flew off the stepstool and lay ...
