This is a little delayed, but wall fixed. Used plasterboard, waterproofing tape, waterproofing membrane and grout. Unfortunately only had one tile ot ...
Hi WreckitRita, you've done a brilliant job. I always put some painters tape along the edge for painting and siliconing, saves those little splodgy bi ...
Hi @Jeanagh,
Are your aluminium window frames bare, or are they already painted? The process can differ depending on whether you’re coating bare alu ...
Hi @Jeanagh - I did the stupid thing. I had painter's tape and a drop sheet down for the first coat of sealer binder, but I got cocky 鸞嵐 and removed ...
While not perfect, it's so much better. I'd like to thank you for your help in getting to this stage.In the end, I hand sanded because the paint was ...
To paint a front door, start by preparing the surface. If it’s an older painted door and the existing paint is damaged, you'll need to sand it back t ...
Hello @WreckitRita
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about rep ...
This is a little delayed, but wall fixed. Used plasterboard, waterproofing tape, waterproofing membrane and grout. Unfortunately only had one tile ot ...
Hi WreckitRita, you've done a brilliant job. I always put some painters tape along the edge for painting and siliconing, saves those little splodgy bi ...
Hi Mitchell, unfortunately I can't afford to do the whole wall so I'm going to have to patch it best I can. I've already got cement sheeting and the ...
Sorry Eric only just seen this. I'll give this a try as, I do miss the look and sound of the water coming from the pump. It's part of the overall as ...
HI All ,
i am starting a DIY project on giving some life to my deck.
i would appreciate any help i can get from this forum .
its a Merbau deck (aro ...