Organising

Hi all, i want to install steadyrack classic version in my garage. However when i drilled 2 pilot holes (cirled in blue in the photo) at where studs w ...

Afternoon, I am looking to add shelves into and existing cupboard to store appliances (mixer, fryer etc.), shelves will be approximately 460mm x 380mm ...

  I have two of these towers and haave had them cut down to 1845cm height to match the pre-existing and installed batten on the side. What is the ...

I have renovated the laundry recently, including retiling the floors and single tile height around the walls. It might not have been the smartest deci ...

Hi, i have a long tall wall that i would like to hoist up the bikes and slide them across using the trolley on a beam left or right onto bike hooks in ...

Hi all, love this page with Bunnings and hope you can help. I am creating a space in my living area for my cats (3) to climb, play and rest. This is t ...

i want the shelf to be sort of heavy duty to be keeping things like (air fryer, toaster, slow cooker, etc.) I would just like a rough list of what i n ...

Hi Folks,I’m planning to commence a Walk-in Wardrobe project for the bedroom and have included a draft drawing below for your reference. The accompany ...

Hi there, I'm taking an unorthodox approach to kaboodle wall cabinets and using them as base cabinets in a narrow under stairs storage area. I'm c ...

This is my kitchen storage under the sink there is dead space to the right of the shelf of almost 20inches which is of Lshape shelving to the next doo ...

We have a very small laundry space that we would like to renovate to maximise space, make it functional and easy to use. 1.8 m x 0.8 m we also use the ...

I'm wanting to attach a Dyson vacuum mount onto the inside of a cabinet. The backboard is basically as thin as cardboard and about 1-1.5cm gap distanc ...

Hi, I want to build a shelf in the gap between a built-in closet and the door of a room. The shelf itself is a piece of 17mm plywood. One of the sides ...