I've just had new skirting boards installed and there's quite a bit of gap in the mitred corners. Is this normal and I should just fill with No More G ...
This is a simple floating desk to fill the void created when we did the bathroom renovations.
It sits a little too high for my liking but we'll rect ...
Hi All, I recently bought an old town house with predominantly west facing single-glazed windows and am now looking at adding an extra glaze to the wi ...
Hi There
I need to put fly screen to my awning windows. it looks like it has got required frame and if I get the right size fly screen I should be a ...
I have approximately 300 Zenith 10G x 50mm Gold Passivated Square Drive Chipboard Screws to be used to screw through the particleboard floor and joist ...
Does anyone know why hollow core doors have a striped/ridged edge? And can it be removed? Hume brand hollow core doors from Bunnings were used in my h ...
Hello everyone, I'm currently in the process of planning out how to install new ceiling and cornice plasterboards but have been struggling to trying t ...
I have purchased a Deta ceiling rose. It has four terminals inside. I have a positive and negative hanging from the ceiling. How to I wire up the ceil ...
I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...