Many thanks for joining the Bunnings Workshop community. You have joined a friendly, helpful community of people who are happy to roll the sleeves up ...
Hi, my handyman got carried away using Mul-tifll (non shrinking, hard setting) whilst filling in some cracks in the wood and in the putty around my gl ...
Hi, we are wanting to build a small picket fence for our indoor Christmas display at work.
The area is around 5m in length and looking at a fence of ...
Hi all,
I thought it may he good to have a feed where we could share any tips and tricks to do with any of the Grid Connect Range being Arlec, Deta, V ...
Hi,
Im looking to using hardie board axon cladding and just looking for confirmation on using timber battens for it. The information I’ve found is bat ...
How can I make this bulge in the wall disappear and achieve a smooth finish in the least amount of time and at the lowest cost? I previously tried to ...
Hi,
I will be building a studio in our backyard which will have a flat roof (5 degree pitch). And I was looking at getting timber ordered for it and ...
Hey there,
The situation is this: my partner and I have begun painting our apartment walls which includes the door frames. The door frames are made ...
Hi all,
We have recently purchased a unit that was built in 1980. The floors are vinyl/lino (not sure) in the kitchen, tiles in the bathroom, and ca ...
The outer layer of our unit's front door has been damaged over the years
1. Around the keyhole
2. A strip lower on the door
3. The edge - away from th ...
My wife and I started this project and it took us 2 weeks to finish (due to commitment towards our full time job and of course kid too). We both are v ...
I had a lockable window winder that needed to be replaced. The issue was that it was stuck in the closed position. Which meant I couldn't unwind the c ...