Hi agsin , I’ve attempted to paint my living room ceiling. I bought a good quality dulux paint with a primer but I have ended up with roller marks eve ...
I have stripped back and sanded a few pieces of timber furniture. I am wanting to keep the raw timber finish/colour. I bought Bunnings soft wax (clear ...
Hi- Theres a chip out of the inside rim of my nice Indoor ceramic planter. The missing piece is shallow, and about 2cm x 3 cm. I think I could build i ...
Hey there, The situation is this: my partner and I have begun painting our apartment walls which includes the door frames. The door frames are made of ...
Hi all,
Have 4 types of cracks that I am wanting to repair in my home all in plaster whilst I paint my house. The house is 25 years old and these cr ...
I am wondering if I can install the Prempanel Acoustic paneling behind my new Scabdia Edge 50 wood burner, as long as I leave the required 350mm gap, ...
Many thanks for joining the Bunnings Workshop community. You have joined a friendly, helpful community of people who are happy to roll the sleeves up ...
Hi this drainpipe is outside my sons bedroom and when it rains it creates a loud dripping noise.
I have in the past taken off the bottom elbow bend ...
Hi all,
I thought it may he good to have a feed where we could share any tips and tricks to do with any of the Grid Connect Range being Arlec, Deta, V ...
Hi All,
Seeking some advice on how to seal cracks/gaps in walls and ceilings?
I have a few gaps in wall corners and in the ceilings between the skir ...
My wife and I started this project and it took us 2 weeks to finish (due to commitment towards our full time job and of course kid too). We both are v ...
I had a lockable window winder that needed to be replaced. The issue was that it was stuck in the closed position. Which meant I couldn't unwind the c ...