Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Whole of House

Help for projects that encompass the entire house
TKP
Community Newcomer

 My wall is largely damaged from attempting to strip paint. Most of the wall has scrape marks/deeper marks and some of the render has been sanded away ...

ilox
Growing in Experience
1 reply

So here is the throne in its better days. Now it is looking worse for wear. The seat has golden-ish metal buttons with metal loops. They show tarnish. ...

ilox
Growing in Experience
1 reply

In 2011, I built this lovely Santa throne from plans bought from the USA. The majority of the timber came from Bunnings Parafield. Since then it has s ...

Al-renos
Just Starting Out
1 reply

Hello! the bottom of my doorframe in the bathroom has some rust that’s come from a leaking shower screen. How do I fix the rust so I can repaint ove ...

hessian86
Getting Established
3 replies

We have just moved into our new house, and are starting to renovate, however the previous owners got paint on the external bricks. Is there a way to r ...

Taroon
Just Starting Out
1 reply

Hi There I need to put fly screen to my awning windows. it looks like it has got required frame and if I get the right size fly screen I should be a ...

Scout1
Just Starting Out
1 reply

I've just had new skirting boards installed and there's quite a bit of gap in the mitred corners. Is this normal and I should just fill with No More G ...

diy_vvv
Getting Established
4 replies

It’s not a hole for a screw driver    

Cortex
Just Starting Out
1 reply

Hello everyone, I'm currently in the process of planning out how to install new ceiling and cornice plasterboards but have been struggling to trying t ...

alkifaf
Finding My Feet
2 replies

I have a golden opportunity to fix squeaky flooring on an upstairs landing of a two storey house, as the carpet is being replaced. I think the floor i ...

jdougydoug
Finding My Feet
2 replies

Hello, I have had to strip back one of my bedroom walls of a dodgy paint job (airtasker job). However once I've done this I discovered half was just a ...

CassM
Getting Established
7 replies

  Hi, I tried to install a Daytek clothesline onto my brick wall using the Dynabolts suggested but even though I drilled 8mm holes for 8mm bolts the ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects