Hi everyone,I've been a longtime reader of the workshop forum and have really enjoyed the positive and constructive community atmosphere, not to menti ...
Hello!
the bottom of my doorframe in the bathroom has some rust that’s come from a leaking shower screen. How do I fix the rust so I can repaint ove ...
Hi All, I recently bought an old town house with predominantly west facing single-glazed windows and am now looking at adding an extra glaze to the wi ...
Does anyone know why hollow core doors have a striped/ridged edge? And can it be removed? Hume brand hollow core doors from Bunnings were used in my h ...
Hi There
I need to put fly screen to my awning windows. it looks like it has got required frame and if I get the right size fly screen I should be a ...
The windows and skirting boards in my living rooms are burgundy. I want to paint them a natural white. Would I be better off sanding off the old pa ...
Do Bunnings have these ? The one I got isn't full opening and locks without pressing the pin now (mines a Gainsborough)
https://www.stylefinishdesig ...
Do you need to undercoat surface before applying putty
Why does old putty crack and crinkle.
if it is strong can you put new putty on top of old put ...
Hi, I'm installing 8mm floor select laminate flooring with 3mm underlay over a concrete subfloor. Previously the landing inside and outside of the fro ...
Hello,
I have the problem of my roller blind being too narrow for the inner frame of the window. I read that I could address this issue by doing a t ...
I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...