Share
We thought we would try and find a new use for our planter box. We zipped down to Bunnings & purchased four metal legs, some battery powered bud lights and a few screws. We now have an attractive and functional entrance hall table.
Materials
Taskmaster 150 x 10 mm Hairpin Black steeel legs (4)
Lytworx decorative budlights
Zenith 8 Guage x 20 mm Button Head stitching screws
Tools
Screwdriver / Drill driver
Steps
Step 1
Screw the four legs onto the corners of the underside of the box using the 20mm stitching screws, a few millimetres in from the edge.
Step 2
Thread the budlights through a gap between the planks in the box, holding in place with a couple of small brads.
Step 3
Attach the light's battery box to the outside of the planter (in an inconspicuous position). We used a small piece of double-sided adhesive so it's non-permanent.
