Share
I would like to renovate my “rumpus room” which was already converted from the garage by previous owner.
It appears the plasterboard has just been applied directly to the brick- and there is double brick in places.
i would like a smooth, flush look from floor to ceiling and intend to run a stud wall along the front, and insulate the recessed area. However how do I deal with the big gap between a stud frame and the window (which sits directly on the bricks)?
Would it make sense to frame the recessed area first- creating a almost a sill for the window- and then attaching plasterboard over the stud and recessed frame for a smooth finish (i acknowledge it will be a deep window- but I can hide with shutters etc).
Does anyone have any other ideas?
Hi @MackaQLD,
It sounds like you're on the right track. A sill is required to cover over the top of the framing. I've created a couple of renderings to illustrate.
If insulating the area wasn't too much of a concern, you could use this depth to create a bookshelf. Let me tag @Dave-1 and @Nailbag to see if they have any other ideas.
Please let me know if you have any questions.
Mitchell
Afternoon @MackaQLD
Well 
Strangley here is one I prepared earlier....
Garage lining for stud walls stage 1
Garage lining for stud walls stage 2 (Cornice and skirting boards)
I like @MitchellMc 's sill suggestion. I only had a small area fro sills next to the side door but if I had a window at half height for sure Id want a solid sill.
Things to note if you frame up the area. The floor slopes in a garage generally. So one side of the frame may be a differant height to the other. Anything long and straight may look a little odd if its at floor level. And the last one I can think of is fix/seal the brick work with waterproofing paint.
Oh and sketch up where your frames and pillars are so you can go back and say "yep" the frame is here!
If you go through my bookmarks you will see how the actuall room was fitted out 
Dave
