Share
There is some wood rot at the bottom of this gate. Should I replace a piece of it or go with a whole new gate? Build from scratch or can U get a gate made to measure for a reasonable price?
Maybe there are some upgrades I could think about if I'm putting in a new on like mounting a wifi camera inside🙂
We have this rebated handrail that you could use @Bluetooth. Bit of a long length for your project, though. Are you going to paint the Merbau, or were you looking for some Merbau timber to construct the top rail out of as well? If you had a router, you could potentially cut a 19mm channel down the centre of a 42 x 28mm 2.7m FJ Pre Oiled Merbau Screening and use it as a capping piece.
Mitchell
Without a router, you could create a capping by joining three pieces of timber @Bluetooth. Likely only an option if you plan to paint the timber, though.
Mitchell
The project is coming along and I have got the tpckets primed and attached to the adjustable gate frame. The railing pieces are primed and ready to be attached.
For the countersunk screws should I fill them with some kind of gap filler or Wood fill? Or just paint over them?
Looking great @Bluetooth!
It depends on what level of finish you're going for. Since your gate is a bit of a feature and everyone will see it when entering the property, I'd take the time to fill the screw holes. You can use Poly 450g Exterior Timber Filler.
Please keep us updated.
Mitchell
First coat of paint after filling screw holes and sanding and priming.
Finished project inside
And outside .
I'm pleased with how it turned out. Thanked for all the help and support!
Hello @Bluetooth
Thank you so much for posting those photo updates. Your gate has come out looking fantastic. It looks very sturdy and blends in so well with your fence. I'm glad we were able to help, I'm sure @MitchellMc and @HandyAndy will be pleased to see the results. I'm sure our members who are in the same situation will find your project very helpful.
Again, thank you for sharing your gate rebuilding project.
Eric
