The Bunnings Workshop community can help with your home improvement projects.
Have a surface level garden bed at our townhouse unit. Next to back patio. I'm wanting to replace it with a raised garden bed.
After removing the existing plants, I noticed what looks like some sort of termite treatment node? There are two other existing bait stations around the unit, but this one looks a lot different. Others are black, more square, flat lid and literally say termite bait station on top. Maybe this one was for underslab treatment?
I have attached photo. The outer circle just looks like it is there so it is easily seen on the surface, it's only 2cm deep, it's the inner circle which goes down into the ground. Took the inner circle cap off and there is just dirt inside?
Anyway, wondering how I should proceed as the raised garden bed I built will lay straight over the top of it. Will I need to extend this pipe up? Just cover it? If it is a soil treatment is that gonna mean edibles in it will be a no go?
Thanks
Hello @backyardback
Welcome to the Bunnings Workshop community. It's sensational to have you join us and thanks for sharing your question about the smart disc inspection point.
It's possible that it could be a termite inspection or treatment point. But just to be on the safe side, I propose relocating your raised garden bed to another location. In this manner your edibles will be safe from chemical leaching and contamination.
Another option is to raise your garden bed with legs and put a bottom to the garden bed. This will prevent direct contact with the soil and prevent your edibles form getting contaminated.
If you have any other questions we can help with, please let us know.
Eric
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.