Should we render limestone retaining walls?

[mando78]

I am looking at a facelift for our old house and want to render, however we have quite a bit of limestone brick which we want to cover too..... front wall, between stairs, side of stairs, up side of drive, one block retainer below window area - as shown with arrows.

The company who is going to render has said they can render this area along with house - can you give your thoughts on this as I have read this may not be a great idea....  

If I don't render how could I change this area???

Any input, ideas greatly appreciated

[Jewelleryrescue]

Hi @mando78 

Its  your place and please do anything  you want to  it render will look great too for 10 years or so as it gets a bit tired.

Your  house looks as neat as a  pin  I wouldnt render it or the wall .   Just my 2 cents worth of opinion here i am a bit biased  towards  nateral materials at times so be aware of this as  you read on.

No  render option. If you wanted  a house personality change try painting the front door and  garage door with the  house facias etc for starters, maybe place a photo of your house in a color simulator and test the rendered colors etc. if you havent already  done this you would be surprised the effects  this will have.

If  your  new house rendering color scheme can retain your lovely limestone walls as is I think it will preserve your property value the most.

If you feel they are a bit run down they can be slightly ground back restoring the nateral appeal once a  high quility stone sealer applied they will last a hundred  years plus.

People place higher value on nateral stone than rendered places.   I see rendered places and  wonder what it is covering underneath.  Rendering is  great for ugly walls and houses it really brings  them to life and raise there value now  consider the same houses added   value if they are   granite or marble clad?

How ever 

1 Bonus   Rendering your wall is  one solution and will them  match your house 100% 

2 There are also  1 million stone like or timber like or any thing  else in the tile world  Imagine  the endless possibilities of tiling them. It should be said not all tiles are outdoor suitable as they can absorb water.  I still used indoor tiles out door I am prepared  to replace  them if they  fail later also a  good  excuse for a color  change

3 or you can  add stone cladding  to change your house looks. 

4 You might like  timber  cladding as an  extra option.

Try to give you some new thoughts reject the ones you dont like.

[EricL]

Hello @mando78 

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your limestone retaining walls.

It's great that you've received excellent advice from @Jewelleryrescue. I totally agree that a stone finish gives the impression that the retaining wall is made of quality materials. An excellent option offered by Jewelleryrescue is to use timber cladding. This has the effect of softening the appearance of your retaining walls as it is made of wood. It's only on closer inspection will they notice that it's made of limestone. 

I propose looking at the SpecRite 1800 x 902mm Pre-Oiled Merbau Alternating Slat Fence Panel. If cut and arranged properly you can easily disguise your retaining wall and give it the impression that it is made of timber. Another option is to use SpecRite 90 x 19mm Merbau Pre-Oiled Decking, you can have the panels as close as 3mm from each other to change the appearance of the wall.

Let me call on our experienced members @Dave-1 and @Nailbag for their recommendations.

If you need further assistance, please let us know.

Eric

[mando78]

@Jewelleryrescue thanks so much for your reply, we have only decided to render the house as the mortar between the bricks is bad in places and the quote to fix this was so expensive compared to the render quote - we will be getting new front door and garage door.

I will look at other options you have mentioned thank you.