Share
Hi all,
How can I go about installing a side gate (either timber or aluminium) in this area? On one side, theres rendered wall, and on the other side, there's combination od concrete sleeper and timber fence.
I prefer the gate to swing outward because there are obstacles like pvc pipe and electrical box blocking it if it were to swing inward.
Thank you!
Hi @Case,
Your best bet would be to install a post for the hinge side of the gate by concreting it into the ground. You could then attach it to the fence post for additional support. Attaching the gate to the retaining wall and fence posts would be tempting, but they already have their own jobs to do. The fence does not have posts that have been concreted in place. Instead, they have been attached to the retaining wall with brackets. This means the fence posts are not as structurally stable as those concreted in, and that is why I'm hesitant about you attaching the gate directly to them.
You'll need to measure the space to determine whether a prefabricated timber gate or aluminium gate will suit the span. They are typically around 900mm wide. If none of the prefabricated gates suit your needs, you might like to consider constructing your own gate. Here's a helpful step-by-step guide: How to build a picket gate.
We have a range of hinges and latches to suit.
Please let me know if you have any questions.
Mitchell
Afternoon @Case
Totally in agreement with @MitchellMc on this one, My side gate at home is at the point I need to replace it as its attache dto the house but the other side is attache dto the fence which has over the years decided to fall towards the house slightly, enough to wedge the gate almost to the point of not being able to open it or close it and this is after shaving off 5-10mm of timber from the side of the gate.
Seperate posts concreted in are far less likely to fall out of plumb. (tho attached to the side of the house they shouldnt move either 
Dave
Thank you Mitchell! 
Hi @Case
Here are a few sample images to give you ideas on possible construction methods. The big grey blocks are the concrete footings for the post and the gate is made from SpecRite 1833 x 900mm Pre-Oiled Merbau Horizontal Slat Gate. The posts are 100 x 100mm 2.4m Post H4 Treated Pine Wet CCA - 2.4m and the filler panels are SpecRite 90 x 19mm Merbau Pre-Oiled Decking - Random Lengths - 90mm.
If you have any other questions we can help with, please let us know.
Eric
Hello @Case
If you look at the picture I've posted earlier, you'll notice three distinct hinges on the left. They would be white in colour and very small in the drawing. It indicates that the door opens outwards away from your PVC pipework. The best part of this design is that it can be switched to the direction that you desire.
The post is imbedded in a concrete footing. It does not need to be anchored to your wall. You'll notice that I've placed small Merbau panels at the side of the posts. Its purpose is to cover the gap between your wall and the post.
If you need further assistance, please let me know.
Eric
You might also like
