Billycart for my son

[cflanders72]

 

 

 Billy cart made for my son made with plywood and fixed with interlocking joints

[MitchellMc]

Welcome to the Bunnings Workshop community @cflanders72. It's fantastic to have you join us, and many thanks for sharing this wonderful project.

Our members will be delighted to hear all about the steps you took while constructing this project. I'd be particularly interested to know how you designed the parts, what software you used and the method for cutting out the sections. Did you cut them out by hand or have some service do it for you? Also, are these sections glued or screwed together? I've got a small boat project on the go, and this construction method would greatly aid the build.

I look forward to you sharing as much detail as possible about this excellent project. 

Mitchell
 

[cflanders72]

 Hi Mitchell,

I used Revit, interlocking plywood panels with glued timber dowels for the main body, see attached instructions which Anyonw is welcome to use for free, made from 12mm plywood single sheet 2400x1200mm

[Anthony5]

 

 

Looking for the billy cart with interlocking plywood panels with glued timber dowels

that was up on this site 2022. I am keen to build one for my grandson

thanks

Tony

[MitchellMc]

Welcome to the Bunnings Workshop community @Anthony5. It's great to have you join us, and many thanks for your question about billy cart plans.

This project was constructed and contributed to the community by @cflanders72 and is not a kit that Bunnings supplies. Hopefully, now that I've mentioned and alerted them to your question, they might be able to provide plans for you to build your own version.

We do have a guide for a traditional billy cart, and I'll include the video below.

Please let me know if you have any questions.

Mitchell