Share
Walk in robe redoWe had a very dysfunctional space as our walk in robe. Nothing fit into hang space, shelving was built in weird sizes, lacked a lot of practical space.
so we pushed back into garage to steal a garage cupboard, and pushed slightly out into entryway to steal another small cupboard. And the end result is pleasing.
Materials
*We had to re plasster walls and then repaint. (Used Dulux wash n wear paint in natural white.)
*we laid hybrid flooring from Bunnings
https://www.bunnings.com.au/floor-select-6mm-2-2m-blackbutt-hybrid-waterproof-flooring_p0135656
ikea pax was only wardrobe that would fit space.
*led lighting and directional lights purchased from Bunnings)
Tools
Plastering tools
paint and painting accessories
Ryobi reciprocator saw
screwdrivers /mallets
(all Bunnings purchases)
Steps
Step 1
Before the demo
We started by pulling everything out, to remove back and side walls for demo.
this is pic of before
Step 2
Step 3
we started at the back wall and worked to the front. After lining walls, we sanded and repainted walls/ ceiling.
Then layer hybrid floor before robe inserts began.
Step 4
section at a time it came together.
electrical was hooked up as we went.
Step 5
final touches were directional lights from Bunnings to give more light.
What a sensational result you've achieved there, @Christie78. I trust you're thrilled with the finished project, as it looks amazing and so much more functional. I love how you've made the best use of a less than optimal layout.
Well done, and many thanks for sharing.
Mitchell
