The Bunnings Workshop community can help with your home improvement projects.
Hello Workshop Community,
in school i have been given a task to make 'somthing' out of two pallets they are aprox 1.25x1.25m
i have decided to make a coffee table.
can somone help me come up with ideas for its design and how to build it?
Thanks
WCE2019
Solved! See most helpful response
will do
Hello Again,
This is where i'm at,
i had a few issues so i am a bit behind
Stay focused and be patient. All great works of art requires a good amount of time.
I am a Bunnings team member. Any opinions or recommendations shared here are my own and do not necessarily represent those of Bunnings. Visit the Bunnings website for assistance from the customer service team.
I havent really been in touch....
almost done, i just have to attach the legs,
photos will b in a couple of weeks...
Hey mate,
Keen to find out how you went. I love the progress pic. Did you decide what to do about legs ?
I’ve made a fair few coffee tables out of pallets. On one I used galvanized plumbing fittings as legs to make it look very industrial which turned out ace. I’ll see if I can track down a photo.
Good Luck.
hello @DIYology,
Yep i did, i made a rectangle frame and attached them to that, diagonals and straight screws....
attached is some pic of the final project, just finished last week....
Thanks for the help.
Thanks for the update, it looks great, good job !!
Thanks heaps @DIYology
i just have to stain the top different colours to make the pattern stand out, then seal it all.....
I am a Bunnings team member. Any opinions or recommendations shared here are my own and do not necessarily represent those of Bunnings. Visit the Bunnings website for assistance from the customer service team.
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.