Workshop
Ask a question

Topics with Label: Building and Construction

super_cub
Growing in Experience
2 replies

Hi everyone, I'm looking for some advice on how to build a wall-mounted shelf based on the design in the picture I've attached (just the shelf not the ...

Claire2024
Just Starting Out
1 reply

Hi, how to install shelvings in the wardrobe in terms of tools and materials. Thanks

lauramariewoott
Finding My Feet
5 replies

Hello, I am wanting to build a dining room table and bench using specrite panels. Will I need to include any type of bracing to support the table or i ...

adamliaw
Growing in Experience
7 replies

Hi all, I am seeking advices for mounting my 85 inch (46kg) TV with mount (15kg) to a plaster over brick wall. According to builder, bricks are 90mm w ...

chenneberry
Finding My Feet
3 replies

I have a small space and only work from home one day per week. I wanted an ergonomic setup that could be put away for most of the week and came up wit ...

shaqqi
Getting Established
16 replies

Hi All This can be my first DIY Bunning project. I would like to make a wooden stain type barn door. Size of opening is width 980 mm width and heig ...

crystalM
Finding My Feet
7 replies

 hi. I moved into my grandmothers house back in January and my brother in law dropped the ceiling because it was on its way of doing so itself, we fo ...

Nuzuma
Just Starting Out
5 replies

Need easy instructions on how to create such a feature wall with minimum tools.

Kingleviathan
Getting Established
3 replies

I want to add a baryard door but the hall way is floor to ceiling empty so nothing to hang the barnyard door onto when i slide the door from the wall ...

tombot1974
Growing in Experience
1 reply

I want to do this as a mini project. I have old wood to do it but dont know the best way as in brackets, nails glue or all three.Based on the pic is a ...

mummatams
Just Starting Out
1 reply

Hi there! I'm a newbie when it comes to creating and building DIY projects, but I find it slightly challenging to wrap my head around the engineering ...

zachorazor
Growing in Experience
20 replies

Hi. I'm constructing a full-sized Iron Man Alcove. Yes, really. And I am using 3d-look and other metallic vinyl wraps for effects. To stick, these ...

Alicia_Woodwork
Having an Impact
16 replies

My gorgeous Goldie, Charlie, was recently diagnosed with hip displacia. This condition makes ordinarily simple movements incredibly difficult. It is f ...

olensh
Just Starting Out
1 reply

Did anyone build a bunnings wardrobe ? It doesn’t seem to have the right instructions. If you had this issue how did you deal with it?

Sergej
Just Starting Out
9 replies

How to build 4000mm x 1800mm x 340mm theatre riser platform with inbuilt steps on each corner?

danitog
Just Starting Out
3 replies

Hi we’re wanting to DIY some custom (adjustable) shelves for the kids existing wardrobes. We’ve figured out the plan, how we want it to look and th ...

mamathar
Just Starting Out
2 replies

Hi There, I need to build a Canvas with Height = 84 cm and width as 1340 cm to stretch a canvas. Can you please help me with what light wood would ...

peterr
Finding My Feet
4 replies

I'm planning to make bookshelves using 'Specrite 1200 x 405 x 18mm Timber Multi Use Pine Panel' for the shelves. I'll cut them to 800mm long. The book ...

blackorange44
Just Starting Out
1 reply

Hi I want to build a riser for my home theatre. The dimensions needed are 290 CM (w) x 190 CM (D) x 30 CM(H) What would I need in materials and too ...

marcusm
Just Starting Out
1 reply

I’m trying to build a new computer desk and had an 1800x600x18 Specrite panel cut down to 1500mm before considering the rest of the project. After a l ...

Samara1
Having an Impact
1 reply

i dont understand why carpenter not covering the full side in left side. Is it how they usually do ?does not look good finishing in left side.

sam3351
Just Starting Out
5 replies

    Hey, I'm about to attempt building a queen bedframe. I designed it myself and have just purchased all the materials. The 70x45 dressed pine t ...

southeywest
Just Starting Out
2 replies

Hey everyone! I’m trying to re-create a discontinued product element - which is a clothing rack/rod attached to shelving. I’m not sure how to recreate ...

WhiteWoolf
Finding My Feet
4 replies

Hi there, we have a raked ceiling in a small living room. The old plasterboard has failed due to water damage and a bad paint job a few years back. As ...