- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
A moody and mature bedroom for our Lego, Hot Wheels and PlayStation loving 8 year old.
The ‘client’ brief was :
• Everything green
• A TV & PlayStation
• Somewhere to display Lego
Materials
Tools
Drill
Screws - depends on your wall depth/stud placement
Circular Saw
Masking Tape
Marker Pen
Steps
Step 1
1/3
Depending on the length of your walls, you may need to cut the panels down.
Tips:
1. Work from the back of the panels, not the front.
2. Use masking tape! This helps with marking as well as holding the felt when cutting with a circular saw.
Step 2
2/3
Once measured and marked up, cut slowly with a circular saw.
Tip:
1. There is quite a bit of flex in the panels so you will want a flat surface to cut on or someone to hold the panel.
Step 3
3/3
Ideally you would screw through into the studs however this may not be possible due to the spacing of the timber pieces. Either way we found the panels to be very secure on the wall.
Using black screws through the felt works great and the screws aren’t visible at all.
Tip:
1. You can use Liquid Nails as an extra way of securing the panels but not necessary.
- Labels:
-
Decorating
-
Renovation
-
Tools and Materials
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
Re: Kids bedroom wall panelling using Specrite panels
What a fantastic result, @TheSparrowHome. You must be super-pleased with how it turned out and your child over the moon with their new excellent room.
I love the panelling, shelves and the lighting. Great work all around!
Many thanks for sharing.
Mitchell

Why join the Bunnings Workshop community?
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects