Fireplace feature wall

[kels1]

Fireplace feature wall

Hand made fireplace stack and feature wall.  Covered in VJ panels and painted. We added built in shelves to give it a look almost like a carpenter had installed high end built in book cases. 

Materials

Bunnings Timber for our extended frame

Large screws

No Nails

Filler

2 x VJ Panels 

Taubmans Paint

Black cabinet handles 

Ceiling cornice

Cement for cornice

Drop Sheets 

sand paper 

Tools

Nail Gun

Nails

Jigsaw 

Mitre saw

Paint Roller 

Paint brushes 

Spatula 

Paint Stirrer

Paint Tray

Steps

Step 1

Build frame for extended fireplace 

Attach Vj Panels with no nails and fix in place with nail gun allow to dry

Fill and sand nail gun spots 

Cut out a hole at bottom for wires needed for fireplace. 
Attach Cornice with required cement allow to dry
Undercoat and seal paint in white used for cornice and panels at least 2 coats on panels. Allow to dry between coats. 
Roller and paint Using choice of colour I needed about 3 coats.

Then using white paint give 2-3 coats on cornice using an angled paint brush.

The process needs a lot of patience and a good project for those who are quite handy with DIY. Some parts of the project need 2 people. 

[JacobZ]

Hi @kels1.

Many thanks for your post and welcome to the Bunnings Workshop community, it is fantastic to have you with us.

What a terrific DIY project! 

Thank you for contributing and sharing your talents with the community. 

It’s clear you put a lot of heart and skill into it. 

Well done and keep creating!

Jacob

[kels1]

Thanks JacobZ

i enjoy DIY, painting and furniture up cycling. I’ve completed many projects in our home this being the most recent. 

[Jason]

Looking forward to seeing more @kels1. Love your work.

Let me also extend a very warm welcome to the community.

Jason

[kels1]

Hi Jason, 

Thank you for your message and those kind words. 

I'm looking forward to sharing any future projects I complete with the Bunnings workshop community