Create a recycled branch lamp

[Mariula]

Create this beautiful lamp from recycled and all natural materials for under $50!

Materials

• Gilly's 200ml Clear Carnauba Polish
• Large branch
• Tree stump slice
• Hemp cord
• Sand paper
• Second hand lamp shade
• Timber Glue
• 200mm Long Screw

Tools

• Chainsaw
• Drill

Steps

Step 1

• With the chainsaw cut any unwanted branches and create a smooth bottom to be able to glue it onto the stump.
• Also cut the stump so it has a flat top and bottom

Step 2

• Clean the tree branch and stump removing any bark
• Sand them both to a smooth finish (optional, can leave them for a more rustic look)

Step 3

• Drill a hole through the centre of the stump and approximately 100mm into the centre of the tree branch, ensuring it's large enough to accommodate the long screw.
• Then, drill a larger hole halfway through the stump. This will allow the screw to penetrate the branch deeply and remain concealed beneath the stump.

Step 4

• Place glue on the bottom of the tree branch and screw the tree branch onto the stump through the bottom of the stump

Step 5

• Use Gillie's carnauba wax to seal the branch and stump (give it 2-3 coats)
• Once dry attach the cord to the branch by creating a knot and attach the lamp shade
• That's it! Enjoy your beautiful new lamp.

[MitchellMc]

Welcome to the Bunnings Workshop community @Mariula. It's terrific to have you join us, and many thanks for sharing your project.

I love your creativity, and the use of recycled and natural materials is truly inspiring. It certainly brings some natural warmth and interest to the room.

Thank you so much for sharing this fantastic idea with us!

Mitchell