kitchen bench gap

[bren72]

 Hi guys, I have installed a kitchen bench top and now have a 1mm gap where the two tops join, I couldn't use bench clamps as there is not enough material to route out on the edge. So I'm wondering if there's a product I can use to fill in the gap?

 

[EricL]

Hello @bren72 

Welcome to the Bunnings Workshop community. It's sensational to have you join us and thanks for sharing your question about your kitchen benchtop gap. 

I suggest using Selleys 300g Clear Wet Area Waterproof Silicone Sealant. This is rated for wet area use so should do very well in your kitchen area.

Here is a handy step-by-step guide: How to silicone seal a bath (the techniques used are applicable to your project)

Please remember to wear personal protection such as gloves, goggles and a mask when working your project.

If you need further assistance, please let us know.

Eric