Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Get started

Kitchen

Help for kitchen renovation projects

Browse by topic:

Painting

Latest

Just Starting Out

1 reply

Going to renovating my kitchen but i would love to reused and keep the marble top that we have. The kitchen looks dark because of the dark cabinets an ...

Just Starting Out

1 reply

Hello, We have just purchased an older home in need of a glow up. We're reasonably experienced, but we're a little unsure on the best paint for the ...

Amassing an Audience

3 replies

As part of our kitchen reno, we extended a portion to the edge of the wall. This left a gap between the ceiling and new cabinets so I had to build ...

Building a Reputation

48 replies

I absolutely hated the timber look laminate and green tiled splash back in our house. so using a few cans of the white knight renew, the hardwood u ...

Having an Impact

1 reply

Hi. I’m planning to re-finish our timber dining table. The plan is to sand it and apply a hard wearing finish. Can you please recommend a hard weari ...

Getting Established

8 replies

Hi, I did 4 coats of “Dulux renovation range tiles and bench top paint” . At least 8 hours of wait between each coat. It looks fantastic, but I am ...

Just Starting Out

1 reply

I bill a cabinet with old panels of Laminex that need to be painted. What paint should be used? Does it need an undercoat?

Just Starting Out

2 replies

Hi All, I’m wanting to change the look of my kitchen colours to white. My kitchen cupboards are melamine. Is this possible & what do I need to buy ...

Just Starting Out

5 replies

I repainted a laminate kitchen benchtop using the Dulux Renovation Range (primer and gloss topcoat). I found the topcoat drying in seconds and I could ...

Just Starting Out

4 replies

What is the best product to use in order to repair a ceiling. There were several cracks and as soon as I went to repair them I found there was a large ...

Just Starting Out

1 reply

I recently installed some Tasmanian Oak benchtops in the kitchen. Prior to installing them I cut them down, sanded them and treated them with 3 co ...