Share
Hi,
I have a 60s house with a kitchen extension into the old laundry. I'm installing refilled jarrah flooring over the existing concrete so it flows throughout the house.
I understand that I need to waterproof the concrete but need to know the correct product to use which will also bond with the correct timber glue.
Also, the concrete is painted, does it need any further reproduction before the waterproofing?
Hello @Fitzhouse
Thanks for sharing your question about waterproofing your concrete floor. If the laundry area is now going to be a part of the kitchen, will it still be used as laundry area? If it's not, then it's not really necessary to waterproof the flooring unless your local council's rules and regulations require it.
Before I make any recommendations, can you please tell us what kind of glue you'll be using for your Jarrah flooring? There are a few waterproofing agents, but they are only rated for tile adhesives. I'll need to make some inquiries for you if they are compatible with your timber glue.
If you have any other questions we can help with, please let us know.
Eric
Hi @Fitzhouse,
Could you please provide a little more information on what this "refilled jarrah flooring" is? That would help us investigate the appropriate glue and then find a compatible waterproofing agent.
As @EricL asked earlier, is this area going to be a laundry again, and does it need waterproofing?
Mitchell
Hi Mitchell,
The area will now all be kitchen so not a laundry.
The wood is 60mm x 11mm tongue and groove.
Since it will now be a kitchen, there is no need to waterproof the area @Fitzhouse. You would typically only waterproof a bathroom or a laundry. If you are worried about rising dampness from the concrete, you will apply Sika Primer MB to the concrete before using the Sikabond T-55 J flooring adhesive.
In answer to your question about the preparation of the paint on the floor, the above products can only be guaranteed if coated over concrete and not paint. So you'd need to remove the paint coating from the concrete.
Please let me know if you have any questions.
Mitchell
You could either hire a floor grinder, or we have the Full Boar 1500W 125mm Concrete Grinder @Fitzhouse. Either of these would be handy if any of that tile glue remains on the surface. By using them, you'll end up with a smooth and clean concrete surface to lay your flooring over. Please remember your PPE when grinding concrete including a proper respirator and safety goggles.
Mitchell
