Share
Hello! I am confused about how to put new line into my line trimmer. I have watched youtube videos and am getting mixed info on whether I have to pull an outer cap off the head to re-thread line, or just line up the arrows and push cord through? All of the initial line has gone as far as I can tell. The manual doesn’t make it as clear as what I would like either 
The bump cap is yellow if that helps. Thank you
Hi @lannah791,
Apologies for the slow reply and sorry to see you're having trouble with your new line trimmer.
Our resident Bunnings D.I.Y. experts will be happy to assist as soon as possible. Let me see if @JacobZ95 might be able to share some advice in the meantime.
Welcome to the Bunnings Workshop community. Feel free to post whenever you need a hand or have a project around the house or garden to share with other members.
Jason
Hi @lannah791,
Having had a look at the manual for that particular model it should have come with a green “speedwinder” that looks like this.
It should just require lining up the arrows, feeding the line through so there is an even amount on either side of the trimmer head and using the speed winder to wind the line into the head.
If you have any trouble, I’m happy to help further.
Cheers,
Jacob
Hi @lannah791
Please keep us updated with your progress, and if you run into any other issues while reloading your line, please don't hesitate to post a question.
Here is a handy step-by-step guide:
Eric
Thank you. I’ll be at Bunnings Monday looking for the wire 
Hi @lannah791,
Our Special Orders Spare Parts team should be able to order a replacement tool. Just speak with a helpful team member at your local store's Special Order desk next time you're in.
Mitchell
