Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to build perimeter fencing – Colourbond holding cement sheeting?

bwhitty25
Community Newcomer

How to build perimeter fencing – Colourbond holding cement sheeting?

Hi everyone!

We are currently in the process of planning for a pool in the backyard, which includes a small retaining wall (500mm) to level the yard, and new perimeter fencing.

Ideally we want a textured / concrete look finish.
Due to the cost of a solid block wall, we were thinking of having a fence built from steel frame and concrete sheeting. Problem being we're having trouble finding a builder who will take on this project at a reasonable cost. We also have our neighbours to consider finish wise.

We were toying with the idea of simply having colourbond installed, and then sheeting the inside with concrete sheeting, so we could achieve our desired look. But we are making the assumption that the colourbond frame might not be suitable to hold the strength needed for the extra sheeting, anyone have any experience with this?

This is kind of the affect we've seen done.

IMG_7957.PNGIMG_7958.PNG

JacobZ
Bunnings Team Member
Bunnings Team Member

Re: Perimiter Fencing – Colourbond holding cement sheeting?

Hi @bwhitty25,

 

Thank you for your question and welcome to the Bunnings Workshop community, it is fantastic to have you with us.

 

Unfortunately, you are correct that Colourbond fencing is not designed to bear the weight of additional materials such as cement sheeting and render.

 

Have you considered having a Colourbond fence installed and at the same time having a timber fence frame installed on your side that you could attach your cement sheeting to? 

 

This would give your neighbour a finished look while still allowing you to achieve the desired aesthetic on your side of the fence.

 

This is one option, allow me to tag @Dave-1, @Nailbag and @Jewelleryrescue to see if they have any other ideas.

 

Let me know if you have any further questions.

 

Jacob

 

bwhitty25
Community Newcomer

Re: Perimiter Fencing – Colourbond holding cement sheeting?

Thanks so much Jacob, great knowledge.

I guess the only appropriate option then is to simply have the fence frame built and sheeted with fibre cement sheets (neighbours are ok with this) to begin with. Though would you advise a steel frame is going to be a better option with longevity vs a timber frame?
We will just have to keep the hunt up for a good contractor. The prices we have received so far have been 4-5x more than what colourbond is to install.

Thanks again.

If helpful for anyone else, below are drawings for the backyard renevation:

Backyard FloorPlan V11 Moodboard.jpg

JacobZ
Bunnings Team Member
Bunnings Team Member

Re: Perimiter Fencing – Colourbond holding cement sheeting?

Hi @bwhitty25,

 

 Suitably treated timber is fine for use but with constant moisture in the area, it will still degrade over time. Around a pool, galvanised steel is going to be a better option.

 

With longevity in mind, the added cost of steel is definitely worth it.

 

Let me know if you have any further questions.

 

Jacob

 

Dave-1
Community Megastar

Re: Perimiter Fencing – Colourbond holding cement sheeting?

Afternnon @bwhitty25 

I am always hesitant to add anything to a fence weight wise or force wise. I would go with the idea suggested by @JacobZ about seperate screen from fence for a few reasons.

- No down the track issues with the fnce or neighbours.

- No sagging of the fence

- No concern for you as you know its been done properly

- Either side can change what is existing without worry to the fence itself.

 

As to the question of steel vers timber posts for the area :smile: I like timber and if drainage is factored in there should be no real shortening of lifespan of the materials, plus its cheaper and I find more maluable.

 

 

Dave

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects