Timber tool box

[JoeAzza]

I decided to make a timber toolbox for timber off cuts and salvaged kerbside timber, my intention  was to use materials at hand, I had pine for the sides, marine ply for the base,  IKEA bed timber ( looks like Swedish pine) for the sides, merbau timber for the handle.

I made the joins by making box joints, the base was recessed  and screwed on the bottom, I did this to allow future replacement if required.

The handle was shaped by making a template and using a jigsaw to cut and router to finish.

The toolbox was oiled then waxed.

[Jason]

Great job as always @JoeAzza! Many thanks for sharing this project with us. I'm sure it will inspire other members. Watch out for plenty of questions about your build process.

Jason

[diy_hausdesigns]

Your craftsmanship is incredible ! This looks wonderful @JoeAzza 

[tnsmith001]

Box joins are next level craftsman. Great job. 

[EricL]

Hi @tnsmith001 

I also suggest having a look at this project - Coffee table with recycled hardwood top. Absolutely no screws visible.

Eric

[Nailbag]

Very nice woodworking skills there @JoeAzza I only wish I had the patience for that type of detail.

Regards, Nailbag