Kitchen bar with floating shelves and arch

[JoMarie-BB]

Flexi Storage floating shelves and a D.I.Y. plywood arch installed in a bar nook and painted in Dulux Vivid White.

• The project
• Steps
• Tools and materials
• More inspiration for your shelving project

The project

We're currently building a new home and wanted to add an arched look to our bar nook, but didn't want to spend a lot to get it done professionally. So, we headed to Bunnings to see if we could attempt to do it ourselves, and we're so proud of how it turned out.

Steps

Step 1

Firstly, we installed the floating shelving, which fitted our space almost perfectly.

Step 2

We then measured out the arch that would fit the space best, traced it out on the plywood and cut it out using a jigsaw.

Step 3

Once the arch was cut into the plywood, we used two offcuts of timber, cut them the same depth as the shelves and attached them into either side of the brick wall with screws.

Step 4

We then attached the arched plywood to the front of the timber off cuts with screws, and used liquid nails to attach the bottom bits over the front of the shelves, which helped cover the slight gaps either side of the shelves.

Step 5

Once attached, I filled all the nail holes with wood filler, and the gaps around the sides and top with No More Gaps.

Step 6

Once it was all dry, I used a mouse sander to sand down the wood filler, the plywood and the shelves.

Step 7

Lastly, I did one coat of primer on the plywood and shelves, and two to three coats of Dulux interior paint in the colour Vivid White to match our walls.

Tools and materials

Materials used in the project:

• 1 x Marine AA grade plywood
  
  
• 2 x Flexi Storage floating shelves
  
  
• Screws 
  
  
• Liquid Nails 
  
  
• Selleys No More Gaps 
  
  
• Wood filler
   
• British Paints - 4-in-1 primer 
  
  
• Dulux interior paint in Vivid White.

Tools used in the project:

• Ozito jigsaw 
  
  
• Circular saw
  
  
• Ryobi drill 
  
  
• Ozito cordless sander.

More inspiration for your shelving project

Workshop community member DannoAbbott built a home library with floor-to-ceiling bookcases.

Community member JoeAzza built timber display shelves to display his CD covers and framed pictures.

You'll find more great ideas from Bunnings Workshop community members in 10 ways to use a floating shelf.

[Jersey1975]

Gosh this is STUNNING! Thank you I am stealing this.  Would you have a photo of the blocks you put in to attach the arch too please?

[JacobZ]

Hi @Jersey1975,

Allow me to tag @JoMarie-BB so she is notified of your question.

Hopefully she will respond shortly.

Jacob