Thanks BIM. I posted the web page that I think you're alluding to in your uploads. Unfortunately, they didn't come out well. But the thread is pretty ...
For any picking up this thread, I've found the data sheets I think BIM refers to, since he kindly directed me to this thread. http://www.dtmtimber.com ...
Sorry, I couldn't find the upload document link for the retainer wall specs. Basically, I'm working on maximum wall heights of 800-900mm and a minimum ...
Thanks everyone for encouragement regarding my pergola idea. I've been busy terracing the slope from the bottom up. I can see why this wasn't done by ...
I think my first post of the drawings failed. So, I extend thanks again to the warm welcome I've received from the workshop community.Let's try to upl ...
Here are a few pics of the site including a profile of the bent 3 by 1 1/2s. There's a gap of about 180mm from top of the arch of the sticks to a line ...
Does anyone have experience with laminating plywood for use as rafters in pergolas? I have half a dozen 5m lengths of bent 70 by 40 timbers (3x1 1/2 i ...
Hi Brian (@ub_268)
Thanks for making your first post. I've moved it so it's a new discussion and is more visible to other community members. I trust ...
For any picking up this thread, I've found the data sheets I think BIM refers to, since he kindly directed me to this thread. http://www.dtmtimber.com ...
Thanks everyone for encouragement regarding my pergola idea. I've been busy terracing the slope from the bottom up. I can see why this wasn't done by ...
I think my first post of the drawings failed. So, I extend thanks again to the warm welcome I've received from the workshop community.Let's try to upl ...
Here are a few pics of the site including a profile of the bent 3 by 1 1/2s. There's a gap of about 180mm from top of the arch of the sticks to a line ...
