Thanks @MitchellMc , they are new tiles and new grout. I’ll try the method you’ve called out and hopefully it’s an isolated case. We just installed ou ...
Hi team, I just had my bathroom wall and floor tiles grouted (about two weeks or so ago). I recently found that the grout came off, not sure how, just ...
The tradie installed the Kit Kat splashback in the laundry. Accordingly to the builder, they can’t put a trim to close off the top cleanly as it’s too ...
Thanks @Jewelleryrescue and @EricL , sounds like I can’t not use something to hide the gap. I might just have to go with the scortia that I’ve already ...
Hi team, our place has existing skirting board and we’ve removed tiles and carpets to make room for hybrid floorboard. I bought matching colour scorti ...
That’s terrible @Nailbag , sorry to hear about your stone benchtop. Did you manage to get it fixed? Thanks for the recommendation. We might have to go ...
Hi @renie,
Are these new tiles with fresh grout, or did the tiler apply new grout over existing grout? If it's the latter, the new grout may not hav ...
Hello @renie
I suggest looking at the QEP 12.5mm x 2.5m Silver Afterfit Tile Trim, it comes in various sizes and will cover the top of the tile and ...
Hello @renie
I'm afraid the only way to cover the gap is to use a timber trim or scotia. Removing the skirting board is of course another choice, b ...
Hi @renie,
Typically, you wouldn't tile right to the edge; you would finish slightly short of it and install a QEP 10mm x 2.5m White Tiling Trim, wh ...
That’s terrible @Nailbag , sorry to hear about your stone benchtop. Did you manage to get it fixed? Thanks for the recommendation. We might have to go ...
Not the fault of the tiler. The spout and mixer had to be swapped around as builder assumed that vanity will be leaning against the wall when we wante ...
Hi @JacobZ , @Nailbag and @Dave-1 , I just realised that there’s a small chip in the wall tile. It’s very sad to see this as the tiler did such a good ...
Thanks @Nailbag! in the end, builder found this in gold that he’d cut and show us for the shower base - https://alltradealuminium.com.au/products/alum ...