Hi Eric. Many thanks for the response.
You’ll note from the attached photos, I’ve done a pretty shoddy job fitting the planks to the door architrave ...
thanks again Eric. I've mostly finished the room and am now the world's biggest jigsaw fan. The last thing I need to do is install something on the si ...
Hi. Decided to buy a new Ryobi One jigsaw (cheap-as-chips at $79) which works a treat (the old corded thing I have is a shocker). Also realized, most ...
Hi. I've installed villaboard and sealed joins and edges and am soon to install the floating floor. I'm considering getting a new mitre saw (my old on ...
Many thanks Eric. As regards the villaboard, , nailed, screwed, glued or some combination? As mentioned, I intend silicon'ing all joins and edges to c ...
Hi. I'm installing a floating floor over hardwood flooring (there is reasonable sound-proofing under the floor between the joists) and have purchased ...
Hi @Yuggle
My only other suggestion is to visit the store so that you can see the actual size of the transition strips and most importantly don't f ...
Good Evening @Yuggle
I have the same thoughts as into the layering of materials that @EricL has. It makes sense to fix the villaboard first before the ...
Hi @Yuggle
I recently replaced my slate flooring and used Selleys 350g Heavy Duty Liquid Nails to glue my yellow tounge on the floor. I recommend s ...
Hello @Yuggle
Welcome to the Bunnings Workshop community. It's sensational to have you join us and thanks for sharing your question about your floa ...
Hi. Decided to buy a new Ryobi One jigsaw (cheap-as-chips at $79) which works a treat (the old corded thing I have is a shocker). Also realized, most ...
Many thanks Eric. As regards the villaboard, , nailed, screwed, glued or some combination? As mentioned, I intend silicon'ing all joins and edges to c ...
Hi. I'm installing a floating floor over hardwood flooring (there is reasonable sound-proofing under the floor between the joists) and have purchased ...
