Your suggestion is really helpful. I had to remove the glue and the Masons tape which was a challenge.
I am happy with the result with the Bear Flas ...
Hi @JacobZ @Nailbag
Did not manage to get the brand you suggested. It is not available in nz. So the bunnings staff introduced a similar product, Ma ...
Thanks for your reply. The main plan to close the top gap and also close the gutter to the flashing as well. Basically I plan to enclosed the flashing ...
Hi all,
I need your advice on the covering the gap between the gutter and the flashing. Today, I have patched it with a tape as temporary measure. I ...
Hi all,
I have a slope roof with edge rods (pic) where the rain water would flow along the rods (outside) towards another building (as marked with r ...
Hi @andre999,
I'd prefer you use something designed for the purpose, and bitumen-backed flashing tape is the preferred option. The tape you have is ...
Hi @andre999
Just seconding @JacobZ suggestion to use the flexible Byute tape. Its a very easy and effecting DIY product that will provide the solu ...
Hi @andre999,
Your approach would also work, but I don't think you need to go to the extent of attaching a new metal piece, as the gap appears to be ...
Evening @andre999
I would use something along the lines of Zenith 10G x 40mm Gold Passivated Countersunk Head Timber Screws - 20 Pack as you are just ...
Good Evening @andre999
I was looking at your photos and description and trying to work out what was happening. I think I have it
The rain hits that ...
Afternoon @andre999
Looks like the nails that have been fired through and into the brickwork behind have worked loose. Time happens but should be eas ...
Your suggestion is really helpful. I had to remove the glue and the Masons tape which was a challenge.
I am happy with the result with the Bear Flas ...
Hi all,
I have a slope roof with edge rods (pic) where the rain water would flow along the rods (outside) towards another building (as marked with r ...
Thank you @Dave-1 for your reply with your suggestion. I will investigate the state of the hole. If I were to drill through, what type of screw shoul ...
Hi all,
I need your advice on refixing the metal sheet back to the concrete wall. There were 2 nails holding the metal sheet to the wall. However, t ...
