Hi Eric , thanks for that , this would be more work , but a lot more solid , if I was to use this method would I galv bolt or just screw to bearers ...
Hi All ,
I have a question regarding piles to bearers . The deck is 10 m x 4 m 400 mm high ( ground to top of deck ) bearers will be flush with jois ...
Hi @jamesmcrae,As @Dave-1 has said, either option will work, but I am more inclined to use ZENITH M12 x 150mm Hot Dip Galvanised Cup Head Bolts And Nu ...
Morning @jamesmcrae
I like the gal bolts, mainly because they dont chance splitting timber and the ease of install. Screws may loosen over time but r ...
Hello @jamesmcrae
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your ...
Evening @jamesmcrae
I was going to go for an option C and @EricL beat me to it. Thats how I did my deck and I found it felt more solid? Its the only ...
Hi Eric , thanks for that , this would be more work , but a lot more solid , if I was to use this method would I galv bolt or just screw to bearers ...
Hi All ,
I have a question regarding piles to bearers . The deck is 10 m x 4 m 400 mm high ( ground to top of deck ) bearers will be flush with jois ...
