Thanks for your help. Yes it was stuck tight with silcon. Once if gently but firmly wriggled/turns the outer cover the whole lot came off back plate a ...
Hi again, well I’ve managed to get the handle off but if the chrome cover has to come off. It’s stuck. Is that meant to come off or do I need a tool ...
Thanks Eric, I’ll make sure all the grub screw is out and I think from the specs M5 for a replacement will do. Would it help to put some CLR or simila ...
Hi,
I've got a leaky mixer tap, which I know most likely means the cartridge needs to be replaced. I've got the correct one. On the weekend I went to ...
Hi @stuie1,
You can see in your second photo a brass nut around the outside of the mixer cartridge. This is what you'll need to get to to remove the ...
Hello @stuie1
Welcome to the Bunnings workshop community. It's marvellous to have you join us, and thanks for sharing your question about your mixe ...
Thanks for your help. Yes it was stuck tight with silcon. Once if gently but firmly wriggled/turns the outer cover the whole lot came off back plate a ...
