Thank you Jacob.Do you know of any handy man who can help me at Doonside? I don't want to pay an arm and leg to get this done. Would appreciate any re ...
I couldn't get through the inside of the brick (it was brick cause wood drillls didn't penetrate it) near the corner. You can see the holes I have the ...
I managed to find the place in my wall where there was space behind the gyprock wall for the final gate. Thought I was settled. Had hope it will last ...
Hi @JacobZ,Thank you for your reply. I did attempt with the Impact Drill mode as you highlighted. I'm wondering if I had the wrong torque settings. Sh ...
So my journey into securing the baby gate is still ongoing. After all the advices I got here, I was able to secure two gates. They seem to hold sturdy ...
Yes. That was the issue. I screwed 70% in so I had the screw edge on the other side of the timber for me to align it with the anchors properly and tha ...
Apologies for the delay. Took some time for me to get around to doing this. The viral cough/cold that is spreading around from daycare to work didn't ...
Thank you Eric for the reply. Initially that was my intention and I asked about the pine wood (the one I showed them was a thin one and not a thick bl ...
Yes. That was the issue. I screwed 70% in so I had the screw edge on the other side of the timber for me to align it with the anchors properly and tha ...
