Hi @MitchellMc, thanks for the advise provided so far; project is going well, find below a photo.
Regarding the face board, I will be using the sam ...
Thanks for the reply, @MitchellMc., I've managed to solve the problem by adding some extra space between the las 6 boards.
I'll start building the roo ...
Hi @EricL, @MitchellMc
I've been making progress on this project, and I would like to ask you about the best option for handrailing and balustrade, a ...
Hi @EricL, I have a similar situation here.I laminated two 4.2m, 140 x 45 members to create the bearer using a nail gun [75 x 3.06], but then I notice ...
Hi MitchellMc,I also need to resurface concrete stairs but this product seems not to be available anymore?Could you please recommend an alternative? T ...
Hi again, I'm close to start this project but I have another question related to the roof, which I decided will be detached, mostly because I don't wa ...
Thanks for the reply, Eric.I'll done some research, and after taking some more measurements, I've build two options for the upper deck. The main diffe ...
Hi @evisbal,
Provided a suitable sized post has been used which is capable of holding up the deck and roof and securely fixed into the ground, then ...
Hi @evisbal,
20mm isn't a huge distance to correct spacing over, say, the last ten boards. Just add an extra 2mm to the gap on that side. However, t ...
Hello @evisbal
Thanks for sharing your question about your timber bearer. The purpose of the CAgroup 50mm x 20m Bearer Protector G-Tape is to preve ...
Hi @evisbal,
Sika 310ml Grey Concrete Sikaflex Pro+ Polyurethane Sealant can be used to fill a variety of gaps between separate elements of your hom ...
Hello @evisbal
In regards to the bearer in yellow have you thought about using angle brackets to anchor it to the floor or perhaps use an anchor po ...
Hi @evisbal For the roof area, the posts that attach to the roof need to be secured with a stirrups concreted into the ground properly. The Existing ...
Hello @evisbal
Thanks for sharing your question about your two-level deck. It's great that you've received very good advice from @Itai. Just to add ...
Hi @MitchellMc, thanks for the advise provided so far; project is going well, find below a photo.
Regarding the face board, I will be using the sam ...