Okay. Another hardware chain has 2.5x50mm stainless steel nails with some threading in a coil but Bunnings doesn't stock them. But it seems that a fra ...
Hi guys,
I'm ready to install the decking boards to part of the deck. Because of the size of the deck (just over 400 mtrs of decking boards) I've deci ...
Thanks @JacobZ
In that case I guess I can put the bent and multi-curved joists on the inside and I can use the noggins to pull them straight. I'll go ...
Hi guys,
the joists have been delivered but some of them are curved. One is curved unevenly about 4/5 of the way along - see the photo where the bend ...
Hi @JacobZ
Going with the random lengths - The decking board butt joints have to be on a joist, joist centres 450mm apart so there will probably be a ...
The total length is 7.2 MTRS so I need to have joins anyway.
Seems a bit odd that random lengths or joined set lengths are the only choices. (Merbau t ...
Hi @Zog,
The more effort you put into using the closest length in the timber you have delivered, the less waste you will have. Typically, you should ...
Hi @Zog,
The general rule of thumb with saw blades is that the more teeth the blade has, the cleaner the cut will be. This is of course assuming tha ...
Hi @Zog That modular decking you are looking at is a specal order item at all bunnings stores talk to the staff there and bring in a plan will help ...
Hi @Zog,
I'd suggest you first use the Good Times planner to determine what you'll need. You can place a custom order for 48 panels, that's no issue ...
@JJ25 Thanks for that. I've done some research since reading your reply and I think you're right about the nutgrass, it matches photos I've found onli ...
Thanks @EricL , I'll check out those links. I haven't drawn up a plan yet as I won't be doing this until the end of the year and I've only just starte ...